Structured cabling, fiber splicing, rack tidying, panel and module replacement, cable testing and labeling — done right once, so future expansion and maintenance are easy. Pay after acceptance.
on-site survey
workmanship warranty
tested & labeled
all Shanghai
Repairs, maintenance, upgrades and setup — most Structured Cabling work can be handled on site
Points planned by workstation and device, Cat5e/Cat6 run to spec, neat and concealed.
Book now
Every point tested for continuity and performance, labeled at both ends, with a point and test record at handover.
Book now
Full replacement of loose, oxidized or poorly-connected panels and modules, with patch panels re-terminated and tidied.
Book now
Re-mount rack devices, bind patch cables neatly, and label front and back so maintenance is obvious at a glance.
Book now
Fiber splicing and ODF wiring, loss testing after termination-box install, link specs verified before handover.
Book now
Survey dead zones on site, deploy and tune APs for roaming, no drops while walking around.
Book nowWe diagnose step by step on site, locate the real fault, then quote
Test cables to find breaks and poor contacts, re-crimp connectors and modules.
Check switch ports, patch-panel termination and panel modules section by section.
Test and label point by point, produce a point map.
Re-mount and bind, tidy patch cables and add labels.
Plan points by workstation and device, deliver a cabling drawing and budget.
Re-splice, check termination box and patch cords, retest loss.
Survey signal strength, add APs and tune roaming.
Replace panels and modules, re-terminate and test.
Remove and restore old points, cable the new site to drawing and test on delivery.
On-site diagnosis is free; the final price follows the itemized quote after diagnosis, and you confirm before we repair
| Item | Price range | Notes |
|---|---|---|
| Survey & plan | Free | Point planning + cabling drawing + budget |
| Network cabling | RMB 30–80/point | Cat6, connectors, panels and labeling |
| Testing & labeling | From RMB 10/point | Per-point test with record |
| Panel / module replacement | RMB 20–60/point | Includes re-termination and test |
| Patch panel termination | RMB 15–40/point | Includes labels and patch tidying |
| Rack tidying | From RMB 300/rack | Mounting, binding, labels and photo record |
| Fiber splicing | From RMB 50/point | Includes termination box and loss test |
| AP deployment & tuning | RMB 150–400/AP | Includes survey, install and roaming tuning |
| Annual maintenance | Negotiable | Scheduled inspection + emergency response |
Six steps from the first call to acceptance and payment
Tell us the area, workstations and current state; we call back within 30 minutes
Measure the site, place points, deliver a cabling drawing and budget
You confirm before work; no mid-job price changes
Neat runs, termination and labeling, minimizing office disruption
Test continuity and performance at every point, rework on the spot if anything fails
Point map + test record, 1-year workmanship warranty
From office towers, parks and chain stores to homes — bookable across the city
Replaced all old cabling with Cat6, tested and labeled every point and delivered a point map so future expansion is straight off the drawing.
Planned points by workstation and meeting area, including rack tidying and AP deployment; everyone was online the day it was handed over.
Cross-building fiber splicing and ODF wiring, commissioned after passing loss tests, linking the plant and office networks.
Surveyed dead zones, added APs and tuned roaming thresholds so forklift terminals stay connected while moving.
Replaced panels and modules wholesale and re-terminated the patch panels, tested point by point after class, all online before term.
Re-planned the low-voltage box, deployed APs across three floors and the yard, verified speeds and roaming on site.
What you most want to know about on-site Structured Cabling
Commonly RMB 30–80/point, including cable, connectors, panels and label testing. It depends on run distance, trays and wall chasing. Survey is free — we give a budget first.
As fast as 30 minutes if close and traffic is light, most jobs scheduled the same day. Survey and plans are free.
Yes. A few panels, modules or connectors are billed per point and tested for continuity on the spot.
We schedule after hours or on weekends where possible, and screen and clean up the work area. Daytime jobs are done section by section and restored immediately.
Every point is labeled and tested, and you get a point map and test record so later adds and troubleshooting are easy to locate.
Yes. We measure signal during the survey and plan AP points and cabling together, avoiding a second round of work.
Describe the device and the symptoms; our technician brings the right tools and common parts. Diagnose first, quote after, and repair only once you approve.
WeChat ID: 17887942669
Long-press to scan, or copy the ID to add us
