Laser, inkjet, copier and all-in-one printers — free on-site diagnosis, quote before repair, pay after it's fixed. We can also refill toner, replace cartridges and set up drivers and sharing.
fastest arrival
on-site diagnosis
parts warranty
all Shanghai
Repairs, maintenance, upgrades and setup — most Printer Repair work can be handled on site
Laser printer repair for all major brands — jams, feed issues, faint print, black lines and noise, with fuser and pick-up roller replacement on site.
Book now
Print head cleaning and unclogging, fixing broken lines, leaks and unrecognized cartridges, plus continuous ink supply installation.
Book now
Diagnosing jams and faint copies on copiers and MFPs, plus scanner faults, document feeder repair and drum replacement.
Book now
Deep cleaning of the optics and paper path, gear lubrication and wear-part replacement for visibly better output.
Book now
Toner and ink refills, genuine cartridge replacement, waste toner cleaning and chip reset — lower cost per page.
Book now
Driver install, network sharing, wireless setup, scan-to-email and duplex; consumables can be sourced and installed on site.
Book nowWe diagnose step by step on site, locate the real fault, then quote
Worn pick-up rollers, dirty sensors or damp paper — checked section by section.
Feed and separator servicing, pick-up roller replacement.
Drum, toner cartridge, magnetic roller and high-voltage contacts checked, replaced if needed.
Drum, wiper blade and fuser film inspected and replaced, optics cleaned.
Head cleaning and unclogging, head replacement and calibration if needed.
Ink path repair, CISS air purge, chip reset or cartridge replacement.
Scanner and document feeder repair, re-configure scan-to-PC and scan-to-email.
Port, sharing, wireless and default-printer settings checked one by one.
Diagnose by brand error code; gear, fuser and sensor service.
On-site diagnosis is free; the final price follows the itemized quote after diagnosis, and you confirm before we repair
| Item | Price range | Notes |
|---|---|---|
| On-site diagnosis | Free | No charge if not repaired |
| Laser printer repair | RMB 80–200 | Jams / feed / faint print / black lines / noise |
| Inkjet printer repair | RMB 60–150 | Clogged head / broken lines / leaks / cartridge not detected |
| Toner refill | RMB 50–80/cartridge | Includes chip replacement and waste toner cleaning |
| Ink refill | RMB 30–60/cartridge | Includes head cleaning |
| Fuser replacement | RMB 200–500 | Fuser assembly replacement and adjustment |
| Print head replacement | RMB 300–800 | Replacement plus calibration and test print |
| Printer setup | RMB 50–100 | Driver + network sharing + wireless config |
| Monthly maintenance plan | Negotiable | Monthly upkeep + emergency repair, priced by machine count |
Six steps from the first call to acceptance and payment
Tell us the brand, model and symptoms; we call back within 30 minutes
We arrange a time slot that suits you
Pinpoint the real fault on site
You confirm before we repair; no mid-job price changes
Common parts and consumables are carried in the van; most fixed on the spot
Pay only when satisfied; 3-month parts warranty
From office towers, parks and chain stores to homes — bookable across the city
Prints were fading across the fleet. We refilled toner and replaced chips, cleaned paper paths, and had every machine back to normal output the same day.
New devices couldn't be shared. We re-planned IPs and permissions, configured wireless printing and scan-to-email, so everyone could print.
Proofs were missing colors badly. After deep cleaning and a head replacement with calibration, color accuracy was back in range.
Copies had dark shadows; we found an aging fuser film, replaced the fuser assembly and cleaned the optics to restore output quality.
Labels were jamming at the feed. After replacing the pick-up roller and cleaning sensors, it ran 500 labels without a jam.
We built an asset and consumables ledger, inspected monthly, and kept printing from ever interrupting classes during the term.
What you most want to know about on-site Printer Repair
Yes. Our technician brings tools, common parts and consumables; most jams, feed issues, faint print and clogged-head problems are fixed on the spot.
As fast as 30 minutes if close and traffic is light. Most jobs are scheduled the same day; we confirm the exact time by phone.
On-site diagnosis is free. We give a quote after diagnosis and only start once you confirm; if it can't be fixed for technical reasons, there's no charge.
Refilling is cheaper while the drum body is intact (RMB 50–80 per cartridge); if the drum or wiper blade is worn, replacing the genuine drum gives steadier quality.
Yes. Priced by machine count, including monthly upkeep and emergency repair; consumables billed separately — cheaper for high-volume offices.
It's usually a port, default-printer or sharing-permission issue. We'll check and fix it on-site and also enable wireless printing and scan-to-email.
Describe the device and the symptoms; our technician brings the right tools and common parts. Diagnose first, quote after, and repair only once you approve.
WeChat ID: 17887942669
Long-press to scan, or copy the ID to add us
